Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Air Fan on a Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Blower motor

See other generations:
Video tutorial

How to remove the cabin air fan on a Mercedes E-Class. In this video, see how to perform the disassembly.

Use a lever to remove the plastic cover under the front glove compartment. Use a screwdriver to unscrew the cover where the fan is located.

Disconnect the fan connector, then pull it out of the cabin. Insert a new fan (connect the power connector).

Finally, reinstall the cover and tighten the screws. Check the correct installation of the previously mounted parts and test the proper operation of the fan.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Fan on the Mercedes E-Class W212
Replacing the Cabin Fan on the Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) .. and replace the cabin fan on the Mercedes E-Class W212, following the instructions below. First, get inside the vehicle and remove the lower panel.. …
How to Remove the Interior Light Fixture on a Mercedes E-Class W211
How to Remove the Interior Light Fixture on a Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. the interior light fixture on a Mercedes Benz E-Class W211, fourth generation. First, get inside the car and use a thin tool to pry off the various plastic.. …
How to Remove the Fuel Injection Pump on a Mercedes E-Class 220 CDI
How to Remove the Fuel Injection Pump on a Mercedes E-Class 220 CDI
Mercedes Classe E (1995-2002 / W210) .. fuel injection pump on a Mercedes Benz E-Class 220 CDI W210. First, open the hood of your car and remove the engine cover by unscrewing the mounting.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos