Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exterior Rearview Mirror on the Mercedes S-Class W126

Model: Mercedes Classe S W126, MK 2 - Years: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990
Part: Side mirror

See other generations:
This video is currently unavailable

In today's tutorial video, we will see the instructions to remove and replace the exterior rearview mirror on the Mercedes S-Class W126, first generation. First, open the front door of your car and start by removing the triangular plastic cover, taking off the lever for adjusting the mirror glass; then disconnect the electrical connector located underneath and remove the three mounting screws using a Torx screwdriver, as shown in the video.

At this point, pull the mirror off from the outside and replace it with the new one!


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Interior Rearview Mirror of the Mercedes S-Class
How to Remove and Replace the Interior Rearview Mirror of the Mercedes S-Class
Mercedes Classe S (1979-1994 / W126, MK 2) Today, let's go through the steps to remove and replace the interior rearview mirror of the Mercedes S-Class. First, get inside the vehicle and pull …
How to replace the exterior rearview mirror of the Mercedes Classe S.
How to replace the exterior rearview mirror of the Mercedes Classe S.
Mercedes Classe S (2005-2013 / W221, MK 5) Today we will discover the procedure that will allow us to disassemble and replace the external rearview mirror of the Mercedes S-Class. First, we op…
How to Replace the Exterior Rearview Mirror on the Mercedes S-Class
How to Replace the Exterior Rearview Mirror on the Mercedes S-Class
Mercedes Classe S (2005-2013 / W221, MK 5) Replacing the exterior rearview mirror on the Mercedes S-Class is a simple and quick task to perform independently. Using a flathead screwdriver, pus…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos