Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Remote Key Fob Battery

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Key

See other generations:
Video tutorial

These images show the steps to open the remote key fob of a Mercedes C-Class to replace its two dead batteries. Remove the emergency key (blade) by sliding the black lever that locks its release.

Using the tip of the blade, press the button located at the top of the compartment from which you removed the blade, then push down vertically: pull out the part of the key containing the two button batteries and proceed with their replacement. Pay attention to their positioning: both must have the positive terminal facing up.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2000-2007 / W203) Are you replacing the battery of a Mercedes C-Class key fob? Here's how to do it: Take your key fob and slide the button to release the metal key. On…
Mercedes Classe C (2007-2013 / W204) In this video, we will detail how to replace the battery in a Mercedes C-Class key fob. Take your ignition remote and remove the metal key. Once the …
Mercedes Classe C (2014-2021 / W205) To replace the key fob battery for the Mercedes C-Class, remove the emergency key from the bottom of the fob along with the cover. Once these are rem…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos