Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Vehicle Air Filter

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Air filter

See other generations:
This video is currently unavailable

Guide to replacing the air filter. Open the hood and locate the engine.

In the center, slightly to the right, you will find the air filter housing. Remove the six screws and lift the cover.

You will see the yellow filter; pull it out and replace it. At this point, the outlet manifold from the filter box is connected to the intake hose. You can either replace the hose (if worn, as shown in the video) or install a second filter directly at the intake of the manifold.

This is a "trumpet" filter that you will connect to the intake using two clamps. Tools: screwdriver


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) How to remove the air filter from a Mercedes C-Class? Let's see how to take it out from inside the engine compartment. The cabin air filter is locate…
Mercedes Classe C (2000-2007 / W203) The cabin air filter is located in the engine compartment, just under the windshield, on the passenger side, right above the battery: open the hood a…
Mercedes Classe C (2014-2021 / W205) This video explains what is done to your Mercedes-Benz C-Class 2203/204/205 during the A1 to A9 service intervals. Service A is the basic service: en…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos