Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Electronic Ignition Switch from a Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

See other generations:
Video tutorial

In this video tutorial, you will see the steps to remove the electronic ignition switch from a second-generation Mercedes Sprinter. First, get inside the vehicle and remove the retaining ring of the ignition switch by unscrewing it with two screwdrivers.

Then, lever the central trim of the instrument panel and unscrew the screws located beneath the panel. At this point, remove the cover surrounding the ignition switch and disconnect the electrical connectors on the back.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How do you set the clock on the Mercedes Sprinter?
How do you set the clock on the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) The clock shown on the instrument panel of the Mercedes Sprinter can be adjusted by turning on the instrument panel and turning the appropriate key i…
How to reset the Service light on the Mercedes Sprinter?
How to reset the Service light on the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) To reset the Service light on the Mercedes Sprinter, insert the ignition key into the ignition barrel to power on the instrument cluster, allowing yo…
How do you reset the Service light on the Mercedes Sprinter?
How do you reset the Service light on the Mercedes Sprinter?
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) It will be possible to reset the Service light on the instrument panel of the Mercedes Sprinter by following the following instructions: the first th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos