Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on My Mercedes C-Class?

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on your Mercedes C-Class and clear the mileage on the onboard computer for the next maintenance interval, perform the following steps. Turn the ignition key to the start position to power on the dashboard.

Next, as shown in the video, press the button located at the bottom left of the steering wheel twice. Navigate the display menu to the service position.

Press and hold the reset button until it clears. Then, turn the ignition back on and check that the indicator shows the mileage for the next service.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2021-2026 / W206) .. On the instrument panel of the Mercedes C-Class, it will be possible to completely remove the Service light that appears by inserting the key into.. …
Mercedes Classe C (2014-2021 / W205) .. how to reset the service light on a Mercedes C-Class model W 205. To reset the light, turn the ignition on by rotating the key, press and hold the menu.. …
Mercedes Classe C (1993-2000 / W202) .. on the instrument panel of the Mercedes C-Class by holding down the ZERO button located on the left side of the instrument panel: you will need.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos