Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to disassemble the plastic or the ceiling light of the headlight of the Mercedes C-Class W203

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Headlight
Operation: How to disassemble the plastic or the ceiling light of the headlight of the Mercedes C-Class W203

Let's see in this video how to remove and replace the external coating or the plastic of the front headlight of the Mercedes C-Class W203. First of all we open the bonnet and start by unscrewing the upper screws of the headlight, disconnecting the electrical connector of the bulbs; after which we remove the plastic cover that we find on the wheel arch, unscrewing the screw with a 10 mm wrench, as shown in the video. At this point we remove the headlight and pry the sides to remove the plastic of the headlight, removing the glue by heating with a heat torch. So let's put it all back together!


Posted on 4 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos