Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : How to reset the TPMS warning light on the Mercedes Sprinter

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: -board computer
Operation: How to reset the TPMS warning light on the Mercedes Sprinter

To reset the TPMS warning light on the Mercedes Sprinter there is no need to intervene directly and / or invasively on the vehicle, in fact, everything is done by acting directly on the dashboard controls. For this reason it is an operation that can be easily performed even in total autonomy. First, insert the key and turn on the ignition. Then navigate through the menu until you find the item that shows the tire pressure. At this point, press the "O" button located under the speedometer once and, finally, press the "+" button located on the right side of the steering wheel. The reset was successful.


Posted on 5 April 2024 by ScegliAuto



How to reset the TPMS warning light on the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) If the TPMS sensor of your Mercedes Sprinter has reading problems which lead to the warning light appearing on the display, you need to perform a man
How do you reset the Mercedes Sprinter service warning light?
Mercedes Sprinter (2006-2018 / MK 2, W906) To reset the Mercedes Sprinter service warning light, you need to turn on the instrument panel by turning the key and hold the 0 button down for a fe
How do you reset the Mercedes Sprinter service warning light?
Mercedes Sprinter (2006-2018 / MK 2, W906) The Mercedes Sprinter service warning light reset procedure involves inserting the ignition key into the lock, turning it to turn on the instrument p

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos