Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Rocker Panel

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Body

If the rocker panel is damaged, it is recommended to replace it rather than repair it, as the replacement part is not very expensive and the repair may not be particularly precise. The replacement is extremely simple since the rocker panel is secured with push clips and snap tabs; however, before proceeding with the removal, disconnect the inner sill cover, the weatherstrip, and the outer sill cover. At this point, remove the push clips at the front and rear wheel wells and completely detach the rocker panel along its entire length; then install the new one.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe E (2002-2009 / W211) The cabin air filter is located on the passenger side, just below the glove compartment; unscrew the screws securing the plastic panel above the kick…
Mercedes Classe E (2002-2009 / W211) There are many tasks you can perform on your car without needing a professional's help. After opening the door and completely emptying the storage co…
Mercedes Classe E (2002-2009 / W211) To replace the central locking control module, first remove the door panel: start by removing the plastic insert covering the lock, then the one at t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos