Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speaker in a Mercedes SLK

Model: Mercedes Slk MK 1, R170 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Speaker

See other generations:
Video tutorial

This guide describes how to replace the original woofers in the vehicle with a more powerful model while maintaining the same dimensions, thus fitting in the same housing. Once the speaker is removed, the first step is to detach the rubber gasket using a sharp object.

Then, unscrew the two screws that hold the woofer in place and proceed to detach it from the housing (the two components are glued). Next, take the new woofer and insert it onto the base after applying glue, ensuring that the power connector aligns with the side cut of the base to allow the cables to pass through.

The purchased woofer may not always match the dimensions of the previous one; if necessary, re-drill the holes for the screw fittings. At this point, reattach the rubber gasket, securing it with glue.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

Where is the OBD2 Port on the Mercedes SLK 2?
Where is the OBD2 Port on the Mercedes SLK 2?
Mercedes Slk (2004-2011 / MK 2, R171) If you do not know where the OBD2 port is located on your second generation Mercedes SLK, do not worry as this guide describes all the steps you need…
Where to Find and How to Access the Battery of a Mercedes SLK?
Where to Find and How to Access the Battery of a Mercedes SLK?
Mercedes Slk (2011-2016 / R172, MK 3) Good morning! For those who may not know, our mission is to assist you in the repair and maintenance of your vehicles, so do not hesitate to ask us f…
Where to find and how to reach the fuse box of a Mercedes SLK?
Where to find and how to reach the fuse box of a Mercedes SLK?
Mercedes Slk (1997-2004 / MK 1, R170) Hello! Today's goal is to access the fuses in your Mercedes SLK. Start by opening the boot. Once done, lift and remove the cover of the boot compartm…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos