|
Do it yourself
| |||
| ||||
Removing the Side Mirror on a Mercedes C-Class W204
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
To remove the external rearview mirror, first tilt the mirror as far forward as possible. Flip the mirror backward and detach the glass from its support with a firm motion. Remove the rear connectors. Now, take off the turn signal by unscrewing the three highlighted screws in the video. This will detach the frame. Unlock the retaining clip that holds the upper and lower parts of the mirror together: this will also release the turn signal. Inside the cover, there are two screws that secure the turn signal, allowing you to detach it. After opening the window, disconnect the speaker housing and its connector. Remove the foam padding contained in the speaker. Take off the cover above the control module in the driver's door. Here, you will find connectors, where the two upper white ones belong to the mirror. Loosen the cables. Now, the mirror is held in place only by the three screws on the speaker triangle. Remove them and pass the wiring harness through. The removal of the mirror is complete.
Updated on 26 May 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
.. interior rearview mirror of a Mercedes-Benz C-Class W204: you will simply need a screwdriver to pry in the designated slot on the short side of the.. …
Mercedes Classe C
(2007-2013 /
W204)
.. how to remove the rear window on a Mercedes C-Class W204 by following these simple steps. First, get a thin metal wire or string to pass between the.. …
Mercedes Classe C
(2007-2013 /
W204)
If the side mirror of your Mercedes C-Class breaks due to an impact, follow these steps for replacement. Use the appropriate controls to tilt the mir…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?
To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |