Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : How to disassemble the EGR valve on Mercedes M-Class?

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W164 - Years 2005-2011
Part: EGR valve
Operation: How to disassemble the EGR valve on Mercedes M-Class?

We will go, to start lifting the engine hood, taking care to secure it, then with a flat screwdriver we will unscrew the locking pins of the ventilation tube, we will remove the soundproofing panel of the engine. Immediately after we will begin to disassemble the locking pins of the egr valve (as in the video). Once the piece has been disassembled from its seat, let's unscrew the screws on it with a screwdriver. Then we proceed to remove the valve. Once the valve has been removed, we will replace it and clean it as appropriate. Once this operation is completed, we will close the hood.


Posted on 18 June 2022 by ScegliAuto



How to recharge the air conditioning gas in the Mercedes M-Class?
Mercedes Classe M (1997-2005 / W163) .. the air conditioning gas in the Mercedes M-Class, a very simple and quick operation. To do this, we will need the specific gas canister shown in..
How to disassemble the fuel pump in the Mercedes M-Class?
Mercedes Classe M (2011-2018 / W166) .. to disassemble the fuel pump in the Mercedes M-Class, a simple operation but one that requires good manual dexterity. First of all, we lift the vehicle..
How to disassemble the car stereo of a Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) .. to sit on the driver's seat of our Mercedes M-Class. Let's start by going to disengage and extract the air conditioning control panel, levering it..

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos