Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Handle Sensor of the Mercedes E-Class?

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Door lock

In this tutorial, you will see how to remove and replace the handle sensor of the Mercedes E-Class, an operation to perform if the lock of that specific door shows signs of malfunction. First, move the inner seal near the lock in question, then remove the bolt located inside the newly exposed hole with a T20 Torx wrench. Once done, grasp the lock cylinder, pull it out from the handle, and disconnect it from the connector. To remove the sensor, you will need to cut the supports it is attached to, then secure the replacement with a plastic tie.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing MAP Sensor P0106
Replacing MAP Sensor P0106
Mercedes Classe E (2002-2009 / W211) .. this simple task. The car is a Mercedes E-Class... …
How to Replace the Parking Sensors on the Mercedes E-Class?
How to Replace the Parking Sensors on the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To replace the parking sensors on the Mercedes E-Class, you need to work on the inside of the bumper, accessing from the bottom of the car. You will need.. …
How to Replace the Brake Pad Wear Sensor in a Mercedes E-Class
How to Replace the Brake Pad Wear Sensor in a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. the brake pad wear sensor on a Mercedes E-Class, safely lift the vehicle and remove the affected wheel. The sensor is generally located in the.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos