Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe B
    4. : How are the longitudinal bars installed on the Mercedes B-Class?

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B MK 2, W246 - Years 2011-2019
Part: Roof Rack Bars
Operation: How are the longitudinal bars installed on the Mercedes B-Class?

In order to install the longitudinal bars of the Mercedes B-Class you have to lift the four small hatches that are located in the upper part of the car, at the four corners of the roof. In this way, the joints inside which the bars must be inserted will now be visible: after these have been inserted, the red lever located at each of the ends of the bars must be lifted. Then it will be possible to cover the ends with the special plastic panels and slide the bars according to your needs; it will also be necessary to check that these are firmly attached to the roof.


Posted on 8 October 2022 by ScegliAuto



How are the longitudinal bars installed on the Mercedes B-Class?
Mercedes Classe B (2019-2024 / W247, MK 3) .. install the longitudinal bars of the Mercedes B-Class you need to lift the four covers that are located on the moldings on the roof. Then it will be..
How do you remove the Mercedes B-Class windshield?
Mercedes Classe B (2011-2019 / MK 2, W246) .. to remove the windshield from the Mercedes B-Class you need to disassemble all the components that cover its perimeter: you start by detaching the..
How to install roof racks on the Mercedes B-Class.
Mercedes Classe B (2011-2019 / MK 2, W246) .. how to install the roof racks of the Mercedes Class B, following the instructions below. First of all, we need to get the kit suitable for our car;..

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos