Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to perform a service reset on Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W205 - Years 2014-2021
Part: -board computer
Operation: How to perform a service reset on Mercedes C-Class

In this video tutorial we can see how to perform a service reset on a Mercedes C-Class by following a few simple steps: insert the key and put it in position one to turn on the instrument panel. Now press the arrow-shaped button on the left of the steering wheel to navigate within the navigation menu; at this point, use the arrow keys to scroll through the menu until you find the message regarding miles or kilometers; at this point, hold down the call button on the steering wheel and the OK key together; if the procedure has been carried out correctly you will see the message (reset trip meter? ) on the display, then choose the item YES to reset the partial kilometres. If they are held down together for a few seconds, the display will show different functions; scroll to find the SERVICE item and confirm service with the OK key.


Posted on 4 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2014-2021 - What does the check engine light on Mercedes C-Class signal? Read Answer
    • Classe C 2014-2021 - What does the Mercedes C200 restraint system warning light mean? Read Answer
    • Classe C 2014-2021 - Where can I find the navigation updates of the Mercedes C-Class W204? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos