Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of the Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

To remove the front headlight of the Mercedes A-Class, open the hood to access the screws securing the headlight assembly from the top. Next, detach the front bumper and the inner fender cover to locate the screws securing the headlight from the bottom.

Once these screws are loosened, you can remove the headlight assembly from its housing by disconnecting the connectors at the back and replacing it with a new part.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight on a Mercedes A-Class?
How to Replace the Front Headlight on a Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. To replace the front headlight on a Mercedes A-Class, loosen the screws located inside the wheel well corresponding to the headlight being replaced... …
Removing Headlight Bulbs on Mercedes A-Class
Removing Headlight Bulbs on Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. burnt-out front headlight bulbs on a Mercedes A-Class? Here's how to remove and replace them. Open the hood by pulling the lever located at the bottom.. …
How to Remove and Replace the Headlight on a Mercedes A-Class
How to Remove and Replace the Headlight on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. and replace the front headlights on a Mercedes A-Class, following the instructions below. First, open the hood of your car and start by removing the front.. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos