Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bulbs on a Mercedes A-Class

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Tail light bulb

If you need to replace the rear light bulbs on this vehicle, refer to the instructions below and consider using the tutorial video. First, open the trunk. On the side of the trunk, there is a small access panel that you need to open to reach the back of the light assembly. Next, remove the retaining screw for the light, allowing the assembly to be free so it can be pulled out by gently tugging it towards you after disconnecting the power connector. Behind the light, there are screws that you need to loosen to access the bulbs. At this point, you will have access to the individual bulbs for replacement.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly and replacement of the rear taillight of the Mercedes A-Class.
Disassembly and replacement of the rear taillight of the Mercedes A-Class.
Mercedes Classe A (2012-2018 / W176) .. and replace the rear lights of the Mercedes A-Class. First, we open the rear hatch of the trunk and start removing the plastic side cover to access.. …
How to Replace the Dynamic Turn Signals on a Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. replace the dynamic turn signals on a Mercedes A-Class, use a flathead screwdriver to pry off the mirror cap. Then, detach the lower part of the cap,.. …
How to Remove the Rear Headlight and Its Bulbs on the Mercedes A-Class
How to Remove the Rear Headlight and Its Bulbs on the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. rear headlight and its bulbs on the Mercedes A-Class. First, open the trunk lid and start removing the plastic side cover; then, unscrew the plastic.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos