Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlight and Its Bulbs on the Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

In today's video, you will see the main instructions for disassembling and replacing the rear headlight and its bulbs on the Mercedes A-Class. First, open the trunk lid and start removing the plastic side cover; then, unscrew the plastic screws of the rear headlight and disconnect the electrical connector of the bulbs, as shown in the video.

At this point, replace any faulty bulbs with new ones if necessary, or replace the entire headlight; apply the reverse procedure for reassembly!


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Headlight of a Mercedes A-Class
How to Remove the Rear Headlight of a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. how to remove the rear headlight of a Mercedes A-Class. Open the trunk and secure it; locate the access to the rear headlight (next to the trunk lining);.. …
Replacing Headlight Bulbs on A-Class
Replacing Headlight Bulbs on A-Class
Mercedes Classe A (1997-2004 / W168) .. replace the rear headlight bulbs on a Mercedes A-Class. Open and lift the trunk to access the interior of the cargo area trim. Remove the cover on the.. …
Removing Headlight Bulbs on Mercedes A-Class
Removing Headlight Bulbs on Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. burnt-out front headlight bulbs on a Mercedes A-Class? Here's how to remove and replace them. Open the hood by pulling the lever located at the bottom.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos