Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up AdBlue in a Mercedes GLK?

Model: Mercedes Glk MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: AdBlue warning light

Video tutorial

In this tutorial, you will see how to top up AdBlue in a Mercedes GLK, a very simple operation to perform as soon as the fluid reaches a low level. First, ensure that the engine is off, then open the boot, remove the floor carpet, and lift the separator panel.

Next, remove the entire glove compartment, locate the cap on your left, and unscrew it. At this point, simply pour in approximately 4.5 litres of fluid using the appropriate canister, available at any auto parts store.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Check the AdBlue Level in a Mercedes GLK?
How to Check the AdBlue Level in a Mercedes GLK?
Mercedes Glk (2008-2015 / MK 1) In this tutorial, you will learn how to check the AdBlue level in a Mercedes GLK, a very simple and quick operation. First, insert the key and turn i…
How to Reset the AdBlue Warning Light on the Mercedes GLK?
How to Reset the AdBlue Warning Light on the Mercedes GLK?
Mercedes Glk (2008-2015 / MK 1) If the AdBlue warning light has illuminated on the instrument panel of your Mercedes GLK, it means that the fluid in the emissions control system has…
How to Activate the Rear Wiper on a Mercedes GLK
How to Activate the Rear Wiper on a Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) Today's video will show you the instructions to activate the rear wiper of the Mercedes GLK. First, get inside the vehicle and turn on the ignition; …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos