Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Checking the Cabin Ventilation Fan Operation

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Air conditioner

Using the air conditioning buttons, you can test both the fan and the internal flap actuators that direct airflow to the various ventilation outlets; therefore, turn on the air conditioning, activate the AUTO function and set the temperature of both zones to the same value; press and hold the TEST REST and recirculation buttons simultaneously to activate the test mode: this will allow you to evaluate the airflow from the various outlets, as the number displayed on the left indicates the outlet being tested, which can then be adjusted.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Check Error Codes via Climate Control Commands
Check Error Codes via Climate Control Commands
Mercedes Clk (1997-2003 / A208, W208, C208) Using the climate control commands, you can check for any fault codes: for their meanings, refer to the user and maintenance manual where you can fin…
Inspection of Glove Compartment Damper
Inspection of Glove Compartment Damper
Mercedes Clk (1997-2003 / A208, W208, C208) The support damper for the glove compartment door is actually a gas spring. It consists of a piston with a rubber seal at the end to retain air, and …
Connecting the Xenon Headlight Control Unit
Connecting the Xenon Headlight Control Unit
Mercedes Clk (2002-2010 / W209, A209, C209) Damage to the ignition unit of the xenon headlight lamps on Mercedes vehicles is a fairly common fault: it is possible to purchase it aftermarket at …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos