Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Find the Fuse Box in a 2019 Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Fuse box

See other generations:
Video tutorial

In this tutorial, we will see where the fuse box is located in a 2019 Mercedes Vito. First, get into the vehicle, turn off the engine, and pull the handbrake. The fuse box can be found under the glove compartment on the passenger side.

Once located, pull the tab near the red wires on the left side of the box. You will see a small arrow and a tab; pull the tab with your fingers to remove the fuse box cover. Once open, you will see the fuses and relays; each fuse is numbered for proper identification using the fuse diagram (also refer to the vehicle's user manual).


Updated on 10 July 2026 by ScegliAuto


Related tutorials

Fuse diagram and location for the Mercedes Vito
Mercedes Vito (1995-2003 / MK 1, W638) In this brief and simple guide, you will find where to locate the fuse boxes of the Mercedes Vito, as well as the fuse diagram. First, get inside the…
Where to Find the Fuse Boxes of the Mercedes Vito
Where to Find the Fuse Boxes of the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) Today, we will see the instructions that will allow you to locate the fuse boxes of the Mercedes Vito, in simple and quick steps. First, locate the e…
Fuses Placement and Diagram for the Mercedes Vito
Fuses Placement and Diagram for the Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the ex…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos