Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Diesel fuel filter

See other generations:
Video tutorial

The fuel filter is not located in the engine compartment like in most vehicles, but underneath the floor, in a more or less central position. Once the vehicle is lifted, locate the filter housing and remove the corresponding support bracket.

Place a container to catch any fuel that spills out and disconnect the inlet, outlet, and return lines by loosening the respective clamps. Then, insert the new filter, ensuring the correct flow direction, attach and secure the lines (replace the clamps if necessary), and then place it back in the support.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Filter on a Mercedes A-Class
How to Remove the Fuel Filter on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) Want to perform maintenance on your Mercedes A-Class without spending money on labor? Let's see in this video how to effectively remove the gasoline …
How to Replace the Fuel Filter on the Mercedes Benz A-Class 180 CDI W176
How to Replace the Fuel Filter on the Mercedes Benz A-Class 180 CDI W176
Mercedes Classe A (2012-2018 / W176) This guide shows how to replace the fuel filter on the Mercedes Benz A-Class 180 CDI W176. The fuel filter is located in the engine compartment near …
How to Change the Fuel Filter in a Mercedes A-Class
How to Change the Fuel Filter in a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) To replace the fuel filter on a Mercedes A-Class diesel, turn off the engine and wait for it to cool down. Open the hood, remove the engine cover, an…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos