Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speakers in a Mercedes E-Class?

Model: Mercedes Classe E W124 - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Speaker

See other generations:
Video tutorial

In this tutorial, you will see how to replace the speakers in a Mercedes E-Class, a very simple and quick operation. Start by going to the seat on the side where you will be working, then using a plastic trim tool to avoid any damage, pry off the small strip indicated and unscrew the two screws located underneath it. Once done, remove the speaker cover and pull out the speaker by prying again with the trim tool.

At this point, disconnect the connector and install the replacement, following the exact reverse procedure.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Speakers in a Mercedes E-Class?
How to Replace the Speakers in a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To replace the speakers in a Mercedes E-Class, use a tool like a screwdriver to pry the panel away from the door. Once the corresponding panel.. …
Removing Front Speakers from a Mercedes E-Class W212
Removing Front Speakers from a Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) .. to remove the front speakers from a Mercedes E-Class W212. First, open the front door and remove the plastic piece located at the top, on the side:.. …
Where to Find the Fuse Box on the Mercedes E-Class W212
Where to Find the Fuse Box on the Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) .. new guide for all of you who own a Mercedes E-Class W212, discover where the fuse box is located in your vehicle. Before proceeding, remember that.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos