Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Adblue Warning Light on the Mercedes E-Class

Model: Mercedes Classe E W213 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: AdBlue warning light

See other generations:
Video tutorial

To reset the service light on this vehicle using a diagnostic system connected via Wi-Fi, follow the instructions and steps outlined below and in the video. Once the PC is connected to the vehicle, wait for the connection with the control unit, then select the vehicle model and the corresponding engine.

Next, select the list of errors present in the control unit and choose the error related to the emissions system, then click OK. This will turn off the warning light on the dashboard.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Refill AdBlue on the Mercedes E-Class
How to Refill AdBlue on the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. let's see how to do this on the Mercedes E-Class. First, open the trunk and start removing the floor panel to access the cap of the AdBlue tank,.. …
Reset the AdBlue Warning Light on the Mercedes E-Class
Reset the AdBlue Warning Light on the Mercedes E-Class
Mercedes Classe E (2016-2023 / W213) .. reset the AdBlue warning light on the Mercedes E-Class. First, get inside the vehicle and connect your diagnostic software (in this case, the VCDS) to.. …
How to Top Up the AdBlue Fluid in the Mercedes E-Class
How to Top Up the AdBlue Fluid in the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. how to top up the AdBlue fluid in the Mercedes E-Class. First, open the hood of the vehicle and start removing the cargo area floor to access the bottom... …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos