Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Dome Light Bulb in the Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Interior dome light bulb

See other generations:
Video tutorial

Below are the main steps on how to remove and replace the cabin dome light bulb in the Mercedes A-Class. First, get inside the vehicle and start removing the light assembly by prying the sides with something thin and sharp.

Then, disconnect the electrical connector of the bulb to remove it from the assembly, as shown in the video. At this point, install the new bulb with the same base; now install the light assembly back onto the roof of the vehicle, following the video tutorial until the end!


Updated on 18 July 2026 by ScegliAuto


Related tutorials

Replacing Cabin Light Bulbs on Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. traditional cabin light bulbs in the Mercedes A-Class W176 with LED types to give the vehicle a much more modern and appealing look, as well as significantly.. …
Removing Interior Dome Light Mercedes A-Class
Removing Interior Dome Light Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. remove the interior dome light of a Mercedes A-Class. First, get inside the car: then use a very thin plastic pry tool and carefully pry on the sides.. …
Replacing the Turn Signal Light in the Mercedes A-Class Mirror
Replacing the Turn Signal Light in the Mercedes A-Class Mirror
Mercedes Classe A (2012-2018 / W176) .. the exterior rearview mirror of the Mercedes A-Class. First, move to the side of the mirror and start by removing the plastic cover found on the side;.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos