Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Light Bulbs on Mercedes A-Class W176

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Interior dome light bulb

Replace the traditional cabin light bulbs in the Mercedes A-Class W176 with LED types to give the vehicle a much more modern and appealing look, as well as significantly improve interior visibility. Start with the center dome light, which must be completely removed from the headliner. Then disconnect the power connector and rotate the bulb holder to extract the old bulb and insert the new one, reversing the steps for reassembly. Next, move to the glove compartment light by removing the dome light from its housing to replace the bulb. Finish in the same way with the trunk light.

Updated on 10 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where is the OBD port located on the Mercedes Class A W176?
Where is the OBD port located on the Mercedes Class A W176?
Mercedes Classe A (2012-2018 / W176) If you are looking to find the OBD port located inside the cabin of your Mercedes Class A W176, all you have to do is read the following guide and fo…
Where is the fuse box of the Mercedes A-Class W176 located?
Where is the fuse box of the Mercedes A-Class W176 located?
Mercedes Classe A (2012-2018 / W176) .. To locate the fuse box of your Mercedes A-Class W176, you only need a few seconds. All you have to do is read the instructions described in the.. …
Where to Find the OBD Port on Mercedes A-Class W176
Where to Find the OBD Port on Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. this new guide for all of you with a Mercedes A-Class W176 (2012-2018), we will discover where the OBD port is located and how to use it independently.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos