Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Turn Signal Bulbs on a Mercedes A-Class?

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the front turn signal bulbs on a Mercedes A-Class W176, a very simple and quick operation. After obtaining the correct replacement bulbs, preferably LED type, open the hood and locate the bulb holder that you will need to remove, located in the center of the headlight.

To remove it, simply rotate it about 45 degrees counterclockwise, gripping it by the narrowest part. Once removed, proceed with replacing the bulb, avoiding direct contact with your bare hands to prevent leaving residues that can cause overheating.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to replace the rear light and bulbs of the Mercedes Class A
How to replace the rear light and bulbs of the Mercedes Class A
Mercedes Classe A (2012-2018 / W176) .. the rear taillight and its bulbs of the Mercedes Classe A. First, we open the rear trunk door and start unscrewing the plastic screw that we find behind.. …
How to Replace the Dynamic Turn Signals on a Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. replace the dynamic turn signals on a Mercedes A-Class, use a flathead screwdriver to pry off the mirror cap. Then, detach the lower part of the cap,.. …
Guide to Replacing the Low Beam Bulb on the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. and replace the low beam bulb on the Mercedes A-Class. In this video, the procedure is shown with the headlight removed from the body; however, the replacement.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos