Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Pump in a Mercedes-Benz C-Class?

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Fuel pump

See other generations:
Video tutorial

In this tutorial, you will see how to replace the fuel pump in a Mercedes-Benz C-Class, a very simple and quick operation. Before proceeding, ensure that the key is not in the ignition for safety.

Start by going to the back seat, then remove the screws located inside the cup holder area and lift the entire seat. Next, open the large center cap, disconnect both the power connector and the fuel line, and unscrew the large outer ring.

At this point, you can extract the pump, insert the replacement, and reassemble everything.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (1993-2000 / W202) .. the fuel pump and its filter on a Mercedes-Benz C-Class. First, lift the rear of the vehicle slightly and begin by removing the fuel filter, disconnecting.. …
Mercedes Classe C (2000-2007 / W203) .. replacing the fuel pump assembly on a Mercedes-Benz C-Class. First, access the rear of the vehicle and remove the rear seat; then remove the upper cover.. …
Mercedes Classe C (2007-2013 / W204) .. To replace the fuel pump on a Mercedes-Benz C-Class, access the cabin and remove the lower part of the rear seats. The pump is located underneath.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos