Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe C
  6. : How to remove the armrest and center console of the Mercedes C-Class.

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Central tunnel
Operation: How to remove the armrest and center console of the Mercedes C-Class.

In this video tutorial, we will see useful instructions for disassembling and replacing the armrest and central tunnel of the Mercedes C-Class. First, we get on board the car and start by opening the armrest, unscrewing the fixing screws to detach and remove it (without damaging the hinge); then we lever the sides of the central tunnel to detach and remove it as well, as shown in the video. At this point, we proceed to replace or restore any plastics, reassembling the central tunnel and then the armrest, following the video tutorial until the end!


Posted on 8 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos