Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve from the Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: EGR valve

See other generations:
Video tutorial

To remove the EGR valve from the Mercedes Sprinter, open the bonnet to access the components located inside the engine compartment: here you will find the EGR valve at the rear of the engine block, immediately under the exhaust manifold. By loosening all the screws that secure the valve to the manifold and the corresponding exhaust pipe, you can remove it by also disconnecting the connectors related to the sensors.

This way, the manifold can be directly connected to the pipe using a replacement kit.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

Removing and Cleaning the EGR Valve on a Mercedes Sprinter 3.0L
Removing and Cleaning the EGR Valve on a Mercedes Sprinter 3.0L
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) Below are the main instructions on how to remove and replace the EGR valve on a Mercedes Sprinter with a 3.0L Diesel engine. First, open the vehicle'…
How to Replace the EGR Valve on a Mercedes Sprinter?
How to Replace the EGR Valve on a Mercedes Sprinter?
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) To replace the EGR valve on a Mercedes Sprinter, open the bonnet to locate the valve at the bottom left of the engine block, just below the exhaust m…
How to Remove the EGR Valve on a Mercedes Sprinter Van
How to Remove the EGR Valve on a Mercedes Sprinter Van
Mercedes Sprinter (1995-2006 / MK 1, W901) In this tutorial, see how to remove the EGR valve on a Mercedes Sprinter van, a very simple and quick operation. Before proceeding, ensure the engine…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos