Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Cleaning the EGR Valve on a Mercedes Sprinter 3.0L

Model: Mercedes Sprinter MK 3, Br910, Br907 - Years 2018-2026
Part: EGR valve

Below are the main instructions on how to remove and replace the EGR valve on a Mercedes Sprinter with a 3.0L Diesel engine. First, open the vehicle's bonnet and begin disconnecting the electrical connector of the EGR valve, located next to the coolant reservoir; then disconnect the valve's pipes by unscrewing the screws at the base to remove it, as shown in the video. At this point, clean it with appropriate products, replacing the EGR valve with a new original one if damaged; then reassemble everything!

Posted on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the EGR Valve from the Mercedes Sprinter
How to Remove the EGR Valve from the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) To remove the EGR valve from the Mercedes Sprinter, open the bonnet to access the components located inside the engine compartment: here you will fin…
How do you replace the EGR valve of the Mercedes Sprinter?
How do you replace the EGR valve of the Mercedes Sprinter?
Mercedes Sprinter (2018-2026 / MK 3, Br910, Br907) To replace the EGR valve of the Mercedes Sprinter, you need to open the hood so that you can locate the valve in the bottom left part compared to the…
How to disassemble the EGR valve in the Mercedes Sprinter van?
How to disassemble the EGR valve in the Mercedes Sprinter van?
Mercedes Sprinter (1995-2006 / MK 1, W901) In this tutorial we can see how to disassemble the EGR valve in the Mercedes Sprinter van, a very simple and quick operation. Before proceeding, make…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos