Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Removing the climate control panel

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Air conditioning
Operation: Removing the climate control panel

In order to remove the air conditioning control panel from the central tunnel console, it is first necessary to remove the radio using the special extraction keys (before disconnecting the radio, it is advisable to check that you have the necessary activation code, if any). for subsequent ignition); once the radio has been removed, unhook the frame around the controls themselves and then remove the fixing screws below and complete the disassembly of the control panel by disconnecting the relative sockets behind it, taking care not to damage the safety devices.


Posted on 29 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2000-2007 - What problems are there with the air conditioning in the Mercedes C-Class? Read Answer
    • Classe C 2007-2013 - What ventilation problem on the Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos