Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Service on a 2005 Mercedes C180

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Warning light – error code

See other generations:
Video tutorial

As shown in the video, to reset the maintenance service on a 2005 Mercedes Benz C180, turn the ignition to position 1. The display shows the trip and total mileage; press the reset button on the left side of the display 4 times in a row, then turn the ignition to position 2. At this point, you are in the service menu.

If the maintenance service (the one showing the wrench) does not appear immediately, navigate to it using the arrows.

Once you reach the wrench icon, press the reset button and decide how much oil the engine should have. Hold the button down for 3 seconds again, and the reset is complete.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port on a Mercedes C180
Where to Find the OBD Port on a Mercedes C180
Mercedes Classe C (2014-2021 / W205) This guide will help you locate the OBD port in your Mercedes C180 so you can connect any diagnostic tool to troubleshoot the ECU errors. First, ente…
How to Reset the Service Light on a Mercedes C180
How to Reset the Service Light on a Mercedes C180
Mercedes Classe C (2007-2013 / W204) This article explains how to reset the service light on a Mercedes C180 if it remains on after the service has been performed. To reset the light, fi…
Reset of the service for a Mercedes C-Class
Reset of the service for a Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) Through today's guide, we can see how to reset the service on a Mercedes C-Class, model C220 produced from 2014 to 2021. We start the procedure by tu…

    Frequently Asked Questions

    • Classe C 2000-2007 - Why did the "SRS" warning light come on in the Mercedes C-Class? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos