Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Instructions for resetting the service light

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C - Years 1983-1993
Part: -board computer
Operation: Instructions for resetting the service light

If the SERVICE warning light comes on on the instrument panel display, it means that it is time to carry out maintenance; after completing the service with the replacement of engine oil and relative filter (check whether to also replace the air and fuel filter) proceed with resetting the SERVICE warning light: this is a manual procedure that is carried out using the control buttons behind the wheel and that of the zeroing of partial kilometers present in the lower left corner of the instrument panel; turn on the panel and select the service item and then carry out the reset using the partial kilometers button.


Posted on 31 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2014-2021 - What does the check engine light on Mercedes C-Class signal? Read Answer
    • Classe C 2014-2021 - What does the Mercedes C200 restraint system warning light mean? Read Answer
    • Classe C 2014-2021 - Where can I find the navigation updates of the Mercedes C-Class W204? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos