Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tail Light from a Mercedes Benz A-Class A250 4MATIC W176

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Tail light

This guide shows how to disassemble the tail light from a Mercedes Benz A-Class A250 4MATIC W176. The first step is to remove the trim panel from the trunk side you are working on by taking out the retaining pin and the two plastic clips at the bottom. Once the panel is removed, locate the three mounting bolts of the light assembly. Unscrew these three elements, being careful not to drop them into the vehicle frame. Pull the light assembly out, taking care not to damage the control wire. Disconnect the wire and remove the part. Reassembly is done by reversing the procedure.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Discs and Pads on a Mercedes Benz A-Class A250 W176
How to Replace the Rear Brake Discs and Pads on a Mercedes Benz A-Class A250 W176
Mercedes Classe A (2012-2018 / W176) This guide shows how to replace the rear brake pads and discs on a Mercedes Benz A-Class A250 W176. The first step is to secure the vehicle and relea…
How to Replace the Battery on the Mercedes Benz A-Class A200 W176
How to Replace the Battery on the Mercedes Benz A-Class A200 W176
Mercedes Classe A (2012-2018 / W176) This guide shows how to replace the battery on the Mercedes Benz A-Class A200 W176. The first step is to open the hood and remove the protective cove…
How to Remove the Rear Door Panel of the Mercedes Benz A-Class W176
How to Remove the Rear Door Panel of the Mercedes Benz A-Class W176
Mercedes Classe A (2012-2018 / W176) This guide shows how to remove the rear door panel of the Mercedes Benz A-Class W176. The first step is to remove the chrome trim panel of the armres…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos