Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Front Wipers on the Mercedes A-Class?

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Windshield wipers

See other generations:
Video tutorial

As shown in this tutorial, replacing the front wipers on the Mercedes A-Class is an extremely simple and quick operation. First, ensure they are in the resting position, then fully extend them.

Grab the first wiper blade and rotate it about 90 degrees. Once done, pull it firmly outward until it disengages from the arm. At this point, position the replacement, push it in the opposite direction, and lock the pin into the designated slot.

Finally, repeat the process for the second wiper blade if necessary.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wipers on the Mercedes A-Class
How to Replace the Front Wipers on the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. and replace the front wipers on the Mercedes A-Class. First, move to the front of your car and lift the wiper arm; then rotate it and pull it backward.. …
How to Replace the Front Windshield Wiper Blades on the Mercedes Benz A-Class W176
How to Replace the Front Windshield Wiper Blades on the Mercedes Benz A-Class W176
Mercedes Classe A (2012-2018 / W176) .. windshield wiper blades on the Mercedes Benz A-Class W176. This operation takes only a few seconds and does not require any specific tools. After parking.. …
How to Replace Front Wipers on the Mercedes A-Class W169
How to Replace Front Wipers on the Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) .. as well as the rear wiper, on the Mercedes A-Class W169, second generation. First, lift the front wiper arm; then press the center button and simultaneously.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos