Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe B
  6. : Where is the fuse box located in the Mercedes B-Class W245?

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B MK 1, W245 - Years 2005-2011
Part: Fuse box
Operation: Where is the fuse box located in the Mercedes B-Class W245?

In this new mini guide, we will discover where the fuse box of your Mercedes Classe B W245 (year 2005-2011) is located. First of all, make sure you have completely turned off the car, then disconnect the battery if you intend to perform maintenance or replacement on the fuses themselves. Once you have taken these simple but important precautions, go inside the cabin and reach the front passenger seat. Then remove the panel located on the footrest and you will finally have free access to the fuses you were looking for.


Posted on 16 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe B 2005-2011 - Where is the fuse box located in the Mercedes B-Class? Read Answer
    • Classe B 2005-2011 - Where are the fuses located on a Mercedes B-Class? Read Answer
    • Classe B 2005-2011 - Where is the fuse located in the Mercedes Class B W245? Read Answer
    • Classe B 2011-2019 - Where is the Mercedes B-Class W246 fuse diagram located? Read Answer
    • Classe B 2005-2011 - Where is the Mercedes B-Class car stereo fuse located? Read Answer
    • Classe B 2005-2011 - What is the fuse of the windshield wipers of the Mercedes Benz B-Class 200? Read Answer
    • Classe B 2005-2011 - Where is the indicator relay of a Mercedes B-Class located? Read Answer
    • Classe B 2011-2019 - What is the cigarette lighter fuse on Mercedes B-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos