Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turn Signal on a Mercedes C-Class Mirror

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Side mirror

See other generations:
Video tutorial

To replace the integrated turn signal in the housing of the exterior rearview mirror, you need to remove the housing itself. Start by rotating the mirror all the way inward, then fold the mirror completely into the closed position.

At this point, locate the spring that holds the housing in place and the corresponding slot where you can insert the tip of a screwdriver to leverage and release the spring. Once the spring is released and the housing is removed from the mirror, gently detach all the plastic tabs around the edge of the inner cover of the turn signal where the LED circuit is located.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

How to Remove the Turn Signal from a Mercedes C-Class Mirror
How to Remove the Turn Signal from a Mercedes C-Class Mirror
Mercedes Classe C (2007-2013 / W204) .. do you remove the turn signal from a Mercedes C-Class mirror? Let's see how to take out the turn signal from inside the exterior mirror. Disconnect the.. …
How to Replace the Turn Signal in the Side Mirror on a Mercedes-Benz C-Class?
How to Replace the Turn Signal in the Side Mirror on a Mercedes-Benz C-Class?
Mercedes Classe C (2014-2021 / W205) In this tutorial, you will see how to replace the turn signal in the side mirror on a Mercedes-Benz C-Class, a very simple and quick operation. First…
How to Change Bulbs in the Mercedes C-Class Mirror
How to Change Bulbs in the Mercedes C-Class Mirror
Mercedes Classe C (2007-2013 / W204) Is the bulb in the exterior mirror burnt out? Let's go through the disassembly of the mirror cover parts. Remove the mirror from the mirror housing b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos