Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Low Beam Bulb on the New Mercedes A-Class

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Headlight bulb

To replace the low beam bulbs on the new Mercedes A-Class, there is no maneuvering space behind the headlights, so access cannot be made from the engine compartment. However, the designers have provided an access window inside the wheel well: by turning everything inward, you can remove the cover and access the back of the headlight. At this point, you can detach the bulb holder and replace the corresponding bulb (consider installing LED bulbs). The alternative would be to remove the headlight and then the bumper.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Low Beam Bulb on a Mercedes A-Class
Replacing the Low Beam Bulb on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. beam bulb in the front headlight of a Mercedes A-Class. First, open the hood and start by removing the tray located above the headlight; then remove the.. …
Replacing the Low Beam Bulb on the Mercedes 180 Class A
Replacing the Low Beam Bulb on the Mercedes 180 Class A
Mercedes Classe A (2018-2026 / W177) .. to replace the low beam bulb on the Mercedes 180 Class A. This is a very simple task that can be done without going to a mechanic and takes little time... …
Replacing Cabin Light Bulbs on Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. traditional cabin light bulbs in the Mercedes A-Class W176 with LED types to give the vehicle a much more modern and appealing look, as well as significantly.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos