Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace Mercedes C-Class siren

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Accessory Kit
Operation: How to replace Mercedes C-Class siren

Due to its position, it is in fact located under the right front fender (passenger side), the alarm siren can be damaged and not sound both in case of activation of the alarm itself but also not signal the opening and closing of the doors ; the replacement of the siren is quite simple to carry out: then lift the car to be able to remove the right front wheel (passenger side) by applying a stand for safety; then remove the fixing screws and the pressure locks of the wheel pass cover and intercept the siren located in the rear part of the mudguard, remove the support plate and disconnect the power socket to complete the disassembly, then proceeding backwards for the installation of the new one.


Posted on 7 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos