Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mercedes Benz CLK W208

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Warning light – error code

Today, you will learn the steps to reset the service light on a Mercedes Benz CLK model W208. The first step is to insert the key into the ignition without turning on the ignition. The second step is to press the button at the bottom left of the display for 2 seconds. The third step is to turn on the ignition and wait for the mileage for the next service to appear on the display. Once you have completed these steps, you can turn off the ignition. If the problem persists, take the vehicle to a workshop for a thorough diagnosis.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" indicator on a Mercedes CLK?
How to reset the "Service" indicator on a Mercedes CLK?
Mercedes Clk (1997-2003 / A208, W208, C208) Good morning and welcome back to our page! Today we will see how to reset the "Service" light on our Mercedes CLK. Obviously, before performing this …
Resetting the Service Light on the Mercedes CLK W208
Resetting the Service Light on the Mercedes CLK W208
Mercedes Clk (1997-2003 / A208, W208, C208) In this video, you can see how the system alerts you that you are about to reach the mileage for the oil change on the Mercedes CLK via the display. …
How to reset the service light on the Mercedes CLK?
How to reset the service light on the Mercedes CLK?
Mercedes Clk (1997-2003 / A208, W208, C208) In this tutorial we can see how to reset the service in the Mercedes CLK, an extremely simple and fast operation, to be done only after completing al…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos