Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Headrests from a Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Seat

See other generations:
Video tutorial

To remove the headrest from the front seats of a Mercedes E-Class, start by positioning yourself in the back seat. Remove the lower cover of the backrest using a flathead screwdriver to disengage the two clips that secure the bottom edge of the panel to the center of the backrest.

Grasp the bottom edge and pull down firmly to detach the panel. Disconnect the electrical connector that comes from one of the headrest pins.

Using a screwdriver, rotate the locking mechanism at the base of the pin on your left, then pull the headrest upward, being careful of the electrical cable.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Remove the Headrests from the Mercedes E-Class
How to Remove the Headrests from the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. removing the front headrest from the Mercedes E-Class. In this case, the disassembly is done with the seat removed; first, remove the rear cover to access.. …
How to replace the headrest of the front seat of the Mercedes E-Class W212
How to replace the headrest of the front seat of the Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) .. headrest of the front seat of your Mercedes E-Class W212 is excessively worn and you want to replace it with a new one, then all you have to do is.. …
Removing Headrests on Mercedes E-Class W211
Removing Headrests on Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. how to remove the headrests on a Mercedes Benz E-Class W211, third series, in simple steps. First, open the door and unscrew the two Torx screws located.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos