Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe C
  6. : How to remove the front bumper of the Mercedes C-Class.

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Front bumper
Operation: How to remove the front bumper of the Mercedes C-Class.

Today we will see the instructions that will allow us to disassemble and replace the front bumper of the Mercedes C-Class, in simple steps. First, we open the car's engine hood and begin to disassemble and remove the upper plastic cover connected to the intake duct; then we remove the front bumper grille, as shown in the video. At this point, we unscrew the additional screws of the bumper, also unscrewing those located on both sides of the front wheel arches; we detach and remove the bumper, replacing it with the new one, applying the reverse procedure for reassembly!


Posted on 27 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos