Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Camera on a Mercedes CLA

Model: Mercedes CLA C117, X117 - Years 2013-2019

Here are the steps to disassemble and replace the rear camera on a Mercedes CLA. First, open the trunk hatch and start removing the inner panel or trim by unscrewing all the fastening screws. Next, unscrew the screws of the camera attached to the hatch itself and disconnect its electrical connector, as shown in the video. At this point, install the new rear camera by connecting it electrically; check its operation before reassembling everything!

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disassemble and Remove the Rear Camera of a Mercedes CLA
How to Disassemble and Remove the Rear Camera of a Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) In this video, see how to disassemble and remove the camera (where the license plate light is located) from the rear hatch of a Mercedes CLA. First, …
How to disassemble the external rearview mirror of the Mercedes CLA 250
How to disassemble the external rearview mirror of the Mercedes CLA 250
Mercedes CLA (2013-2019 / C117, X117) If one of the external rearview mirrors of your first-generation Mercedes CLA 250 is broken or you simply want to replace it with a new one, then all…
Removing the Rear Headlight of a Mercedes CLA
Removing the Rear Headlight of a Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) Today, you will learn how to remove the rear headlight of a Mercedes CLA. First, open the trunk and lift the carpet lining. Then, use a socket wrench…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos