Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of the Mercedes GLC

Model: Mercedes Glc C253, X253, MK 1 - Years 2015-2022
Part: Front bumper

Follow the steps necessary to remove and replace the front bumper of the Mercedes GLC, as outlined below. First, open the hood and start removing the plastic clips located at the top of the bumper; then remove the additional clips located under the bumper and on both sides of the wheel wells, also unscrewing the mounting screws as shown in the video. At this point, gently unclip the bumper from the sides until it is completely removed; then install the new bumper by reversing the procedure!

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Bumper Grille on a Mercedes GLC
How to Replace the Front Bumper Grille on a Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) Follow these instructions to remove and replace the front bumper grille on a Mercedes GLC without removing the front bumper. First, open the hood of …
How to Remove the Center Grille of a Mercedes GLC
How to Remove the Center Grille of a Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) Let's see how to remove the grille located on the front bumper of a Mercedes-Benz GLC. Prepare to remove the central plastic grille: unscrew the bolt…
Where are the fuses located in the Mercedes GLC?
Where are the fuses located in the Mercedes GLC?
Mercedes Glc (2015-2022 / C253, X253, MK 1) On board the Mercedes GLC, the fuses are distributed inside the appropriate fuse boxes that are installed on the vehicle: in this type of car it will…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos