Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Tank from the Mercedes E-Class

Model: Mercedes Classe E W124 - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995

See other generations:
This video is currently unavailable

In this guide, you will see the main steps to remove and replace the fuel tank on the Mercedes E-Class. First, lift the vehicle and start by unscrewing the drain plug on the tank, allowing all the fuel to drain into a container; then disconnect all the fuel lines, and unscrew the mounting bolts for the brackets to lower the tank from the frame (using a hydraulic jack to remove it), as shown in the video.

At this point, install the new fuel tank by applying the reverse procedure!


Updated on 24 August 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on the Mercedes E-Class
Replacing the Fuel Pump on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. and replacing the fuel pump on the Mercedes E-Class. First, open the rear doors of the vehicle and start removing the rear seat to access the fuel.. …
Where to Find and How to Open the Fuel Door of a Mercedes E-Class?
Where to Find and How to Open the Fuel Door of a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. The fuel door of a Mercedes E-Class is located on the right rear side of the vehicle. To open the fuel door, the process is designed.. …
How to Remove the Windshield Washer Fluid Reservoir on the Mercedes E-Class
How to Remove the Windshield Washer Fluid Reservoir on the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. washer fluid reservoir on the Mercedes E-Class. First, open the hood of the vehicle and locate the windshield washer fluid reservoir, which is.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos