Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the windshield washer reservoir of the Mercedes E-Class

Model: Mercedes Classe E W210 - Years 1995-2002

Today's guide will show us the main instructions useful for disassembling and replacing the windshield washer fluid reservoir of the Mercedes E-Class. First, we open the hood of the car and begin to locate the windshield washer fluid reservoir, located on the top of the engine compartment; then we disconnect the windshield washer fluid tubing, allowing the fluid to drain into a container, and unscrew the mounting screws of the reservoir to remove it, as shown in the video. At this point, we install the new reservoir, topping it up with the new windshield washer fluid!

Posted on 22 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Adblue tank of the Mercedes E-Class.
Replacement of the Adblue tank of the Mercedes E-Class.
Mercedes Classe E (2016-2023 / W213) .. replace the AdBlue liquid tank of the Mercedes E-Class. First, we lift the vehicle and begin to locate our AdBlue tank, which we find at the back; we.. …
Replacement of the heating valve of the Mercedes E-Class
Replacement of the heating valve of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. and replace the heating valve of the Mercedes E-Class. First, we open the hood of the car and start disassembling and removing the plastic cover located.. …
How to check the AdBlue level of the Mercedes E-Class
How to check the AdBlue level of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. check the AdBlue fluid level of the Mercedes E-Class. First, we get into the car and start the instrument panel; then we press the two buttons on the.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos