Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Initialize the Windows of the Mercedes GLC?

Model: Mercedes Glc C253, X253, MK 1 - Years 2015-2022
Part: Checks and maintenance

To initialize the windows of the Mercedes GLC, turn on the ignition. With the driver's window closed, lower it completely using the appropriate switch. Then, raise it all the way up until it reaches the stop. Once it reaches the stop, pull the switch upward again until you feel a second click. At this point, the window will be initialized, and the same procedure can be performed for all other windows; this procedure applies to all models of the Mercedes brand.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Side Steps on a Mercedes GLC
How to Install Side Steps on a Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) Start by removing the clips that secure the plastic door sills on your Mercedes GLC, then remove the corresponding lower bolts. Once done, open the d…
How to replace the windshield wipers of the Mercedes GLC 2
How to replace the windshield wipers of the Mercedes GLC 2
Mercedes Glc (2022-2026 / C254, X254, MK 2) To complete the procedure that allows you to independently replace the windshield wipers of your second edition Mercedes GLC, simply follow these ste…
Where is the battery located and how to reach it in a Mercedes Glc?
Where is the battery located and how to reach it in a Mercedes Glc?
Mercedes Glc (2015-2022 / C253, X253, MK 1) The battery of our Mercedes GLC is located in the engine compartment. To reach it, we will have to open the hood. Then, we will have to remove the en…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos