Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on the Mercedes Vito W639

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Warning light – error code

See other generations:
Video tutorial

In this video, you will learn how to reset the service on a Mercedes Vito W639. Start by turning the key to position two, then use the buttons on the left side of the steering wheel, where the directional arrows are located, to navigate to the service screen.

Press the top arrow twice until you reach the service screen.

Now, press the lowest button on the left of the speedometer and hold it for at least fifteen seconds until you hear a beep indicating that you have achieved your goal. Release the button and press the right button, then the up button for two seconds, followed by the button at the bottom of the speedometer.

Select "service completed" and confirm. You will need to press the button at the bottom of the speedometer for three seconds to reset the warning light.


Updated on 26 August 2026 by ScegliAuto


Related tutorials

How to reset the service light on a Mercedes Vito W639
How to reset the service light on a Mercedes Vito W639
Mercedes Vito (2003-2013 / MK 2, W639) In this video, you will see how to reset the maintenance light on the Mercedes Vito W639: first, turn on the ignition and wait for the system checks …
How to Reset the Service Light on a Mercedes Vito
How to Reset the Service Light on a Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) The instructions provided in this guide will allow you to reset the maintenance service warning on a Mercedes Vito, as well as on a Viano. First, ent…
Where is the Horn on the Mercedes Vito?
Where is the Horn on the Mercedes Vito?
Mercedes Vito (2003-2013 / MK 2, W639) In this video, you can see where the horn is located on the Mercedes Vito W639 version. It is positioned at the front of the vehicle, just behind the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos