Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the starter motor located in the Mercedes C-Class?

Model: Mercedes Classe C W205 - Years 2014-2021
Part: Starter motor

Video tutorial
Detailed instructions - In this video, you can see where the starter motor is located in the Mercedes C-Class and how to proceed if you need to replace it. As shown, the motor is positioned in the lower area of the engine, on the driver's side. To access and remove it, start by opening the hood and disconnecting the negative terminal of the battery. Then, go underneath the vehicle and, using an E11 socket wrench, remove the two mounting bolts. Finally, separate the motor from the wall, disconnect the power supply, and follow the reverse procedure to install the replacement.

Updated on 26 August 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor from a Mercedes C-Class
How to Remove the Starter Motor from a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. you begin, open the hood of your Mercedes C-Class. Start by removing all the hoses and intake manifolds located above the starter motor, loosening.. …
How do you replace the starter motor of the Mercedes C-Class?
How do you replace the starter motor of the Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. to replace the starter motor of the Mercedes C-Class, you need to open the hood so that you can access the components inside the engine compartment:.. …
How to Replace the Starter Motor on a Mercedes C-Class
How to Replace the Starter Motor on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) ..nd replace the starter motor on a Mercedes C-Class, following the instructions below. First, open the hood of your car and start by disconnecting b.. …

Other guides you may be interested in

How to Adjust the Handbrake on a BMW 1 Series?

To adjust the handbrake on a BMW 1 Series, use a tool to pry off the leather cover that wraps around the base of the handbrake lever. Once this cover is removed, you will be able to locate the spring that regulates the handbrake tension. At this point, adjust the nut located at the base of the spring: tightening the nut will make the handbrake firmer and reduce the lever's travel. Conversely, loosening the nut will decrease the handbrake's firmness and increase the lever's travel.

Watch the video!


by ScegliAuto

More videos